The set includes four ornaments, each fitted with an adjustable printed polyester ribbon for hanging. Use them on a Christmas tree, on bare branches in a vase, tied into a holiday table setting, or grouped in a bowl or tray with candles, greenery, and other seasonal objects.

The Natural Oak finish works especially well with warm neutrals, paper decorations, linen, brass, dark green, and simple evergreen branches. It gives holiday decoration a natural material note without adding another wood object to the room.

Each ornament measures approximately 2.8 inches wide by 3.5 inches high. The maximum ribbon length is 7.3 inches. The set arrives in a gift box, making it easy to store between seasons or give as a holiday gift.

The form is asymmetric rather than frontal. It changes as you move around it, which makes it useful on a console, low shelf, sideboard, bookcase, or pedestal where the object can be seen from more than one angle. At 30 cm high, it has enough height to stand alone, but it is still compact enough to work with books, ceramics, vessels, and smaller objects.

Each sculpture will vary slightly in grain, tone, and surface. That variation is part of the material, not a defect. The piece weighs 8.5 kg, so it should be placed on a stable surface and handled with care.

The design can be used two ways. Hang it on the wall as a pendulum wall clock, or place it on a shelf, console, desk, or mantel as a freestanding clock. The open center lets the wall or objects behind it remain visible, which keeps the clock from feeling heavy despite its height.

A glass face protects the dial, while the wood frame gives the piece a warmer character than a metal pendulum clock. The rounded hour indexes keep the face clear and easy to read. The short hand and pendulum finish change with the frame color, so the Brown and Natural versions each have their own material balance.

Ikkuna uses a sweep movement and a separate pendulum unit. It requires two AA batteries, which are not included. Rechargeable batteries are not supported. A wall-mount wood screw is included; use hardware appropriate to your wall type if installing into drywall, masonry, or any surface that requires anchors.

The cabinet is made from brushed stainless steel with a glass mirror front. The steel gives the piece a clean architectural character, while the rounded bent edges soften the frame and keep the profile from feeling harsh. Angled brackets at the back support the cabinet while keeping the design open at the sides.

Behind the mirror, the slim storage space keeps everyday items close without leaving them exposed. In a bathroom, use it for small grooming essentials. In an entry or wardrobe area, it can hold keys, fragrance, sunglasses, or other small items that tend to collect on surfaces.

The cabinet comes pre-assembled and is designed for indoor wall mounting. The official product data lists bathroom use, hallway use, wardrobe use, and storage mirror use. It is not described as a recessed medicine cabinet, so treat it as a wall-mounted mirror cabinet unless your supplier provides different installation instructions.

The compact body has a rounded, almost half-cylinder form that projects from the wall without becoming oversized. Both the dial and body are kept deliberately clear: no heavy numbers, no ornate frame, and no decorative hardware competing with the shape. The wood and MDF construction gives the clock a warmer feel than a metal station clock, while the simplified face keeps it clean enough for modern interiors.

Each side has its own sweep movement, which reduces the usual ticking sound of a step movement. Because the two dials operate independently, they can be set to the same time for everyday use or to different times if the clock is used in a workspace that tracks another time zone.

Madeto is available in Black, Light Gray, and Green. Black gives the clock the strongest graphic look, Light Gray is softer and easier to blend into pale walls, and Green adds a muted color option without making the piece feel playful. The clock requires two AA batteries, which are not included. Two wood screws for wall mounting are included; confirm wall type and use suitable anchors or hardware where needed.

Colored hands make the hour and minute hands easy to tell apart at a glance. The round wood frame and glass cover give the clock a clean, finished look for a child’s room, kitchen, hallway, family room, classroom, or study area. It is available in Red, Yellow, and Blue colorways.

The clock uses a radio-controlled step movement. The official manual identifies the radio signal as Japan’s JJY signal, with 40kHz / 60kHz automatic selection. For use outside Japan, radio reception should not be assumed unless confirmed by the supplier. The clock can be used with radio reception turned off and set manually as a quartz clock.

The step movement is not a silent sweep mechanism, so a ticking sound may be noticeable in a very quiet room. The clock runs on one AA alkaline battery and mounts to the wall with a wood screw. For plasterboard, concrete, or other non-wood wall types, use a wall-appropriate hanger rated for the clock’s weight.

Aarno uses a wood frame rather than a metal case, giving the clock a softer look than a typical industrial double-face clock. The dial is wide and easy to read, with slim numerals, hour markers, and only hour and minute hands. The result is clear from a distance without looking busy up close.

Each side has its own sweep movement and battery compartment. The two dials can be set to the same time for normal home use, or to different times if you want to track another time zone. The magnetic dial panels can be removed for battery changes and time setting.

The clock is available in Brown and Black. Brown uses acacia wood for a warmer natural grain, while Black uses oak with a darker finish and a stronger graphic contrast against the white dial. Because the frame is wood, grain and tone may vary slightly from piece to piece.

Aarno requires two AA batteries, which are not included. Rechargeable batteries are not supported. Two wood screws are included for installation, but the clock must be mounted to a strong surface, such as a thick wooden wall, wood post, or concrete wall that can support the load. Do not install it on drywall or plasterboard alone, thin wood walls, or ceilings.

The dial is clean and readable, with rounded numerals and slim minute markers. A wood hour hand adds a small material detail at the center of the face, while the black minute hand gives enough contrast for quick reading. There is no second hand, which keeps the face visually calm and avoids the constant motion of a ticking seconds display.

The clock is made with a beech wood frame, glass cover, MDF, and plastic components. Its 12.6-inch width gives it enough scale for everyday visibility without taking over the wall. The 1.8-inch depth creates a more finished profile than a flat printed clock.

Puinen uses a sweep movement and runs on one AA battery, which is not included. Rechargeable batteries are not supported. A wall-mount wood screw is included; use hardware appropriate to your wall type if mounting into drywall, masonry, or any surface that requires anchors.

Kasten’s rectangular body gives it a different character from the usual round station clock. The acacia wood frame has a slim box shape with visible grain, while the dial keeps the layout clean: hour markers only, no numerals, and a wood hour hand that connects the face back to the frame. The result is practical from a distance and visually lighter than a metal double-face clock.

The design can be used in several ways. Mount it horizontally for a low, wide profile, mount it vertically where wall space is narrow, or place it on a stable surface as a freestanding clock. The double-sided construction makes it useful between rooms or along circulation paths, while the rectangular form makes it easy to place on a console, shelf, reception counter, or desk.

Kasten uses two sweep movements, one for each side, to reduce the usual ticking noise of a step movement. Each side requires its own AA battery. Batteries are not included, and rechargeable batteries are not supported.

Two wall-mount wood screws are included. For wall installation, mount only to a thick wooden wall, wood post, or concrete surface that can support the required load. Do not install it on drywall or plasterboard alone, thin wood walls, or ceilings.

The design has a window-like box frame in a natural wood finish, with rounded numerals and small dot markers on the face. The oval dial softens the rectangular frame, while the two-sided construction keeps the clock practical in open or transitional spaces.

Navis can be mounted to a wall or placed freestanding on a stable surface. Used on the wall, it projects outward so both faces can be read from opposite directions. Used on a shelf, counter, or console, it works as a compact double-face tabletop clock.

Each side has its own sweep movement and battery. The clock has no second hand, which keeps the dial visually clean and reduces the usual ticking distraction. The two faces can be adjusted separately if needed.

Navis is made from wood and MDF and comes in a Natural Wood finish. Because the frame uses natural wood, grain pattern and tone may vary slightly from piece to piece.

The clock requires two AA batteries, which are not included. Rechargeable batteries are not supported. Two wall-mount wood screws are included. For wall installation, mount only to a thick wooden wall, wood post, or concrete surface that can support the required load. Do not install it on drywall or plasterboard alone, thin wood walls, or ceilings.